Skip to content

Staking infrastructure for fee collection and reward distribution for the Uniswap protocol.

License

Notifications You must be signed in to change notification settings

uniswapfoundation/UniStaker

Repository files navigation

UniStaker

UniStaker Banner

Uniswap V3 protocol fee collection and distribution via UNI staking.

What it does

This repository contains contracts which allow Uniswap Governance to enable and manage protocol fees on Uniswap V3. If Uniswap Governance chooses to upgrade to these contracts, it will retain the right to set protocol fees on Uniswap V3 Pools but it will not control the fee assets themselves. Instead, the revenue generated by the fees is trustlessly distributed to those UNI holders who choose to delegate and stake their tokens.

Rewards do not accumulate to stakers in the fee tokens. Rather, rewards accumulate in a token defined during the deployment of the contracts in this repo. The fees accrued by each pool are continually auctioned to any entity who is willing to pay a fixed amount of that token to the staking contract in exchange for the fee tokens accrued by a given pool.

UNI holders who stake their tokens are required to delegate their governance voting weight, either to themselves, or to another entity who can vote on their behalf.

Stakers earn a share of rewards proportional to their share of the total UNI staked. Stakers only earn rewards while their tokens are deposited. When a staker deposits, they earn a share of the ongoing reward distribution. When a staker withdraws, they stop earning rewards.

Stakers may designate an address which is the beneficiary of their staking rewards. This means an address can earn rewards on behalf of the original depositing address of the UNI tokens. The address which performs the deposit retains the right to withdraw and update the staking position.

Each deposit is tracked on a per-position basis. Stakers may add to or withdraw UNI from a given deposit balance, or may alter the governance delegation and reward beneficiary associated with that deposit. A given address can have any number of deposit positions which are each tracked and managed independently.

To take effect, Uniswap Governance must successfully pass a vote to upgrade ownership of the V3 factory to this system. Once transferred to these contracts, that ownership cannot be revoked. While Governance may continue to adjust fee levels and rewards parameters, it irrevocably relinquishes the ability to claim the fees earned for itself. These would forever be distributed to UNI stakers.

The staking system allows for other contracts to be added as revenue sources for staking reward distribution in the future.

How it works

The system consists of two core contracts which are designed to be deployed into, and interact with, the existing ecosystem of Uniswap contracts operating onchain. The two new contracts are V3FactoryOwner.sol and the UniStaker.sol. The former manages ownership of the existing Uniswap V3 Factory contract, while the latter manages staking mechanics and the distribution of rewards to stakers.

flowchart TD
    A[Uniswap Governance] -->|"
    Can set fees on specific pools

    Can not collect fees
    Can not transfer ownership
    "| A1[V3FactoryOwner]:::new
    A1 --> B["Uniswap V3 Factory"]
    B --> C[(Pool 1)]
    B --> D[(Pool 2)]
    B --> E[...]
    style E fill:transparent,stroke:transparent,stroke-width:4px
    classDef new stroke:#F7F,padding:10px,stroke-width:3px,line-height:3.5,font-weight:bold
    B --> F[(Pool N)]
    B ..-> |"Collect fees on fee-enabled pools via V3FactoryOwner.claimFees"|A1
    A1 ..-> |"Rewards immediately deposited into UniStaker"|GG[UniStaker]:::new
    G((UNI holders)) --> |"
    Delegate and stake UNI to
    earn rewards from fee-enabled pools

    "|GG
    G ---> |Vote on governance proposals|A
    M((MEV searcher)) <..-> |"Collect fees by sending WETH
    to be used as rewards"|A1
Loading

V3FactoryOwner

The V3FactoryOwner contract is designed to act as the owner of the Uniswap V3 Factory. Governance can opt to transfer ownership of the factory to an instance of this contract. While the owner of the factory becomes the V3FactoryOwner, the admin of the V3FactoryOwner will be governance. In this way, governance retains the right to configure pool protocol fees via permissioned passthrough methods.

The V3FactoryOwner has a public method which enables anyone to claim the protocol fees which have accrued for a given pool. In order to claim the fees, the caller must pay a fixed amount of a token defined when the V3FactoryOwner is deployed (the PAYOUT_TOKEN). This sets up a continuous "race" wherein external parties will compete to claim the fees accrued by each pool once it becomes profitable to do so.

Concretely, if the PAYOUT_TOKEN was WETH, a third party would claim a pool's fees by paying for them in WETH, which would be sent to the staking contract for distribution to stakers.

UniStaker

The mechanics of the UniStaker contract are heavily inspired by the Synthetix StakingRewards.sol implementation. The contract manages the distribution of rewards to stakers by dripping those rewards out over a fixed period of time. This period restarts if more rewards are distributed (e.g. by the public fee claiming mechanism on V3FactoryOwner detailed above). This Synthetix style staking mechanism has been widely discussed in the DeFi ecosystem and should be reviewed by any party seeking to understand the mechanics of UniStaker.

flowchart LR

    A[UniStaker] --> |"Hold deposit tokens and
    delegate on behalf of depositor"|SurrogateFork
    SurrogateFork --> |Yes|Surrogate["Surrogate contract for delegate
        (Holds stake deposits, delegates
		to delegate address)"]
    SurrogateFork --> |"No, deploy new surrogate"|Surrogate
    A1((UNI holder)) --> |"Stake UNI
    Withdraw UNI"|A
    A .-> |Earns rewards|B(("Beneficiary
    (original holder or
    other address)"))
    SurrogateFork{{"Was a surrogate contract previously
    deployed for this delegate?"}}
Loading

The UniStaker contract diverges from StakingRewards.sol in several ways:

First, UniStaker enfranchises depositors by allowing them to retain their UNI governance rights. It does this by depositing staked tokens to an instance of DelegationSurrogate, a dummy contract whose sole purpose is to delegate voting weight to a designated entity. UniStaker requires stakers to delegate to themselves or another address. They cannot delegate to the zero address.

Second, UniStaker allows depositors to designate the beneficiary of their staking rewards. Effectively, any given deposit can earn rewards on behalf of any designated address.

Third, UniStaker tracks stake on a per-deposit basis. Stakers may add to or withdraw UNI from a given deposit balance, or may alter the governance delegation and reward beneficiary associated with that deposit. A given address can have any number of deposit positions which are each tracked and managed independently.

Fourth, UniStaker has a bevy of small improvements to the Synthetix staking mechanism. These include optimizations for greater precision, lower gas usage, and refactoring for the sake of clearer code.

Finally, UniStaker is designed to accept rewards from any number of addresses designated by the admin. While Uniswap V3 protocol fees will be the only source of rewards initially, it is possible to add more in the future. Uniswap Governance will serve as the admin with the ability to add reward sources in the future.

Development

These contracts were built and tested with care by the team at ScopeLift.

Build and test

This project uses Foundry. Follow these instructions to install it.

Clone the repo.

Set up your .env file

cp .env.template .env
# edit the .env to fill in values

Install dependencies & run tests.

forge install
forge build
forge test

Spec and lint

This project uses scopelint for linting and spec generation. Follow these instructions to install it.

To use scopelint's linting functionality, run:

scopelint check # check formatting
scopelint fmt # apply formatting changes

To use scopelint's spec generation functionality, run:

scopelint spec

This command will use the names of the contract's unit tests to generate a human readable spec. It will list each contract, its constituent functions, and the human readable description of functionality each unit test aims to assert.

Audits

The UniStaker, V3FactoryOwner, and DelegationSurrogate contracts have been extensively audited. The reports for these audits can be found in the /audits directory.

Deployments

Production deployments of these contracts are available at the following addresses on Ethereum mainnet:

Contract Address
UniStaker 0xE3071e87a7E6dD19A911Dbf1127BA9dD67Aa6fc8
V3FactoryOwner 0x2e27332b25Ce245F6628377bc83573A001313C58

License

The code in this repository is licensed under the GNU Affero General Public License unless otherwise indicated.

Copyright (C) 2024 The Uniswap Foundation

About

Staking infrastructure for fee collection and reward distribution for the Uniswap protocol.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •