ActiveRecordCompose

activermodel (activerecord) form object pattern.

Installation

To install active_record_compose, just put this line in your Gemfile:

gem 'active_record_compose'

Then bundle

$ bundle

Usage

ActiveRecordCompose::Model basic

It wraps AR objects or equivalent models to provide unified operation. For example, the following cases are supported

Context-specific callbacks.

A callback is useful to define some processing before or after a save in a particular model. However, if a callback is written directly in the AR model, it is necessary to consider the case where the model is updated in other contexts. In particular, if you frequently create with test data, previously unnecessary processing will be called at every point of creation. In addition to cost, the more complicated the callbacks you write, the more difficult it will be to create even a single test data. If the callbacks are written in a class that inherits from ApplicationRecordCompose::Model, the AR model itself will not be polluted, and the context can be limited.

class AccountRegistration < ActiveRecordCompose::Model
  def initialize(account = Account.new, attributes = {})
    @account = account
    super(attributes)

    # By including AR instance in models, AR instance itself is saved when this model is saved.
    models.push(account)
  end

  # By delegating these to the AR instance,
  # For example, this model itself can be given directly as an argument to form_with, and it will behave as if it were an instance of the model.
  delegate :id, :persisted?, to: :account

  # Defines an attribute of the same name that delegates to account#name and account#email
  delegate_attribute :name, :email, to: :account

  # You can only define post-processing if you update through this model.
  # If this is written directly into the AR model, for example, it would be necessary to consider a callback control for each test data generation.
  after_commit :try_send_email_message

  private

  attr_reader :account

  def try_send_email_message
    SendEmailConfirmationJob.perform_later(account)
  end
end

Validation limited to a specific context.

Validates are basically fired in all cases where the model is manipulated. To avoid this, use on: :create, etc. to make it work only in specific cases. and so on to work only in specific cases. This allows you to create context-sensitive validations for the same model operation. However, this is the first step in making the model more and more complex. You will have to go around with update(context: :foo) In some cases, you may have to go around with the context option, such as update(context: :foo) everywhere. By writing validates in a class that extends ApplicationRecordCompose::Model, you can define context-specific validation without polluting the AR model itself.

class AccountRegistration < ActiveRecordCompose::Model
  def initialize(account = Account.new, attributes = {})
    @account = account
    super(attributes)
    models.push(account)
  end

  delegate :id, :persisted?, to: :account
  delegate_attribute :name, :email, to: :account

  # Only if this model is used, also check the validity of the domain
  before_validation :require_valid_domain

  private

  attr_reader :account

  # Validity of the domain part of the e-mail address is also checked only when registering an account.
  def require_valid_domain
    e = ValidEmail2::Address.new(email.to_s)
    unless e.valid?
      errors.add(:email, :invalid_format)
      return
    end
    unless e.valid_mx?
      errors.add(:email, :invalid_domain)
    end
  end
end

account = Account.new(name: 'new account', email: '[email protected]')
account.valid?  #=> true

account_registration = AccountRegistration.new(name: 'new account', email: '[email protected]')
account_registration.valid?  #=> false

updating multiple models at the same time.

In an AR model, you can add, for example, autosave: true or accepts_nested_attributes_for to an association to update the related models at the same time. There are ways to update related models at the same time. The operation is safe because it is transactional. ApplicationRecordCompose::Model has an internal array called models. By adding an AR object to this models array By adding an AR object to the models, the object stored in the models provides an atomic update operation via #save.

class AccountRegistration < ActiveRecordCompose::Model
  def initialize(account = Account.new, profile = account.build_profile, attributes = {})
    @account = account
    @profile = profile
    super(attributes)
    models << account << profile
  end

  delegate :id, :persisted?, to: :account
  delegate_attribute :name, :email, to: :account
  delegate_attribute :firstname, :lastname, :age, to: :profile

  private

  attr_reader :account, :profile
end

Account.count  #=> 0
Profile.count  #=> 0

account_registration =
  AccountRegistration.new(
    name: 'foo',
    email: '[email protected]',
    firstname: 'bar',
    lastname: 'baz',
    age: 36,
  )
account_registration.save!

Account.count  #=> 1
Profile.count  #=> 1

By adding to the models array while specifying context: :destroy, you can perform a delete instead of a save on the model at #save time.

class AccountResignation < ActiveRecordCompose::Model
  def initialize(account)
    @account = account
    @profile = account.profile  # Suppose that Account has_one Profile.
    models.push(account)
    models.push(profile, context: :destroy)
  end

  attr_reader :account, :profile

  before_save :set_resigned_at

  private

  def set_resigned_at
    account.resigned_at = Time.zone.now
  end
end

account = Account.last

account.resigned_at.present?  #=> nil
account.profile.blank?        #=> false

account_resignation = AccountResignation.new(account)
account_resignation.save!

account.reload
account.resigned_at.present?  #=> Tue, 02 Jan 2024 22:58:01.991008870 JST +09:00
account.profile.blank?        #=> true

delegate_attribute

It provides a macro description that expresses access to the attributes of the AR model through delegation.

class AccountRegistration < ActiveRecordCompose::Model
  def initialize(account, attributes = {})
    @account = account
    super(attributes)
    models.push(account)
  end

  attribute :original_attribute, :string, default: 'qux'
  delegate_attribute :name, to: :account

  private

  attr_reader :account
end

account = Account.new
account.name = 'foo'

registration = AccountRegistration.new(account)
registration.name  #=> 'foo'

registration.name = 'bar'
account.name  #=> 'bar'

Overrides #attributes, merging attributes defined with delegate_attribute in addition to the original attributes.

account.attributes  #=> {'original_attribute' => 'qux', 'name' => 'bar'}

Callback ordering by #save, #create and #update.

Sometimes, multiple AR objects are passed to the models in the arguments. It is not strictly possible to distinguish between create and update operations, regardless of the state of #persisted?. Therefore, control measures such as separating callbacks with after_create and after_update based on the #persisted? of AR objects are left to the discretion of the user, rather than being determined by the state of the AR objects themselves.

class ComposedModel < ActiveRecordCompose::Model
  # ...

  before_save { puts 'before_save called!' }
  before_create { puts 'before_create called!' }
  before_update { puts 'before_update called!' }
  after_save { puts 'after_save called!' }
  after_create { puts 'after_create called!' }
  after_update { puts 'after_update called!' }
end

model = ComposedModel.new

model.save
# before_save called!
# after_save called!

model.create
# before_save called!
# before_create called!
# after_create called!
# after_save called!

model.update
# before_save called!
# before_update called!
# after_update called!
# after_save called!

I18n

When the #save! operation raises an ActiveRecord::RecordInvalid exception, it is necessary to have pre-existing locale definitions in order to construct i18n information correctly. The specific keys required are activemodel.errors.messages.record_invalid or errors.messages.record_invalid.

(Replace en as appropriate in the context.)

en:
  activemodel:
    errors:
      messages:
        record_invalid: 'Validation failed: %{errors}'

Alternatively, the following definition is also acceptable:

en:
  errors:
    messages:
      record_invalid: 'Validation failed: %{errors}'

Development

After checking out the repo, run bin/setup to install dependencies. Then, run rake spec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and the created tag, and push the .gem file to rubygems.org.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/hamajyotan/active_record_compose. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the code of conduct.

License

The gem is available as open source under the terms of the MIT License.

Code of Conduct

Everyone interacting in the ActiveRecord::Compose project's codebases, issue trackers, chat rooms and mailing lists is expected to follow the code of conduct.